Difference between revisions of "Art & Technology"

Revision as of 14:02, 16 April 2017

Usually meets on first Tuesday of each month, 7 - 9pm.
Sessions can be a talk on a chosen topic, or a group investigation into a particular idea or technique.
Potential to collaborate on a project, eg for a community art installation, and maybe even working with other groups.

Working under commission from Hebden Bridge Handmade Parade, a project was developed in conjunction with Todmorden CE Primary School.
Year 5 pupils were asked to pair up & make pencil drawings of 'mythical fire creatures', following the festival's 2016 theme. Children then re-worked drawings by using a single 3m length of string, taped to black paper.
Drawings were then transcribed onto builders' polythene sheet, roughly 60 x 60cm, using a CD pen to avoid smearing.
Electroluminescent wire, of various colours, was obtained in 3m lengths, along with combined inverters/ sequencers and 4 x AA battery packs. This enabled 5 wire drawings to be powered from 1 battery pack and inverter. 3 batches of kit enabled 15 similar drawings to be created.
[kit details to be documented]. Sourced from: http://elwirecraft.co.uk/
Finished drawings were taped to the inside of window frames in the first floor of Central Methodist Church, next to the main carpark in Todmorden.

See separate thread

Several ideas have been generated for this event. Further work is needed to develop these.

@@ Line 5: / Line 5: @@
 == Todmorden Lamplighter (Nov 2016) ==
 * Working under commission from Hebden Bridge Handmade Parade, a project was developed in conjunction with Todmorden CE Primary School.
-* Year 5 pupils were asked to pair up & make pencil drawings of 'mythical fire creatures', following the festival's theme this year. Children then re-worked drawings by using a single 3m length of string, taped to black paper.
+* Year 5 pupils were asked to pair up & make pencil drawings of 'mythical fire creatures', following the festival's 2016 theme. Children then re-worked drawings by using a single 3m length of string, taped to black paper.
 * Drawings were then transcribed onto builders' polythene sheet, roughly 60 x 60cm, using a CD pen to avoid smearing.
 * Electroluminescent wire, of various colours, was obtained in 3m lengths, along with combined inverters/ sequencers and 4 x AA battery packs. This enabled 5 wire drawings to be powered from 1 battery pack and inverter. 3 batches of kit enabled 15 similar drawings to be created.