Difference between revisions of "Laser cutter"

From Bridge Rectifier Wiki
Jump to: navigation, search
(Created page with "We have a Laserscript LS6040 laser cutter that was supplied by [http://hpclaser.co.uk/ HPC Laser] in Elland.")
 
Line 1: Line 1:
 +
[[File:LS6040 1 1024w.jpg]]
 +
 
We have a Laserscript LS6040 laser cutter that was supplied by [http://hpclaser.co.uk/ HPC Laser] in Elland.
 
We have a Laserscript LS6040 laser cutter that was supplied by [http://hpclaser.co.uk/ HPC Laser] in Elland.
 +
 +
This equipment must only be used by [[inducted persons]] who have received appropriate training.
 +
 +
'''Use by those who have not been fully trained on laser cutter operation and safety is forbidden.'''
 +
 +
'''WARNING: misuse or carelessness can result in fire, injury and damage to the equipment.'''
 +
 +
== Specifications ==
 +
 +
== Materials ==
 +
 +
Only materials which are on the approved list must be used.
 +
 +
'''WARNING: use with non-approved materials can result in:'''
 +
 +
* '''fire'''
 +
* '''injury'''
 +
* '''toxic and corrosive fumes'''
 +
* '''damage to the machine.'''
 +
 +
=== Approved materials list ===
 +
 +
* Laser safe MDF
 +
* Laser safe plywood
 +
* Acrylic a.k.a. Perspex
 +
** Note that cast acrylic is much preferred over extruded and while the latter can be cut, it smells terrible
 +
* Cardboard
 +
* Polypropylene
 +
* Polyethylene foam
 +
 +
=== Stock ===
 +
 +
Members are encouraged to purchase their own sheet material stock. However, occasional sheets can be purchased from Bridge Rectifier at the cost + 10% to cover the postage costs associated with replenishing stock.
 +
 +
All stock usage, whether for induction or workshop, or personal use, must be logged.
 +
 +
A new wiki page should be created for each order and use recorder against it as material is used.
 +
 +
* [[January 2017 Kitronik sheet stock order]]

Revision as of 20:32, 11 January 2017

LS6040 1 1024w.jpg

We have a Laserscript LS6040 laser cutter that was supplied by HPC Laser in Elland.

This equipment must only be used by inducted persons who have received appropriate training.

Use by those who have not been fully trained on laser cutter operation and safety is forbidden.

WARNING: misuse or carelessness can result in fire, injury and damage to the equipment.

Specifications

Materials

Only materials which are on the approved list must be used.

WARNING: use with non-approved materials can result in:

  • fire
  • injury
  • toxic and corrosive fumes
  • damage to the machine.

Approved materials list

  • Laser safe MDF
  • Laser safe plywood
  • Acrylic a.k.a. Perspex
    • Note that cast acrylic is much preferred over extruded and while the latter can be cut, it smells terrible
  • Cardboard
  • Polypropylene
  • Polyethylene foam

Stock

Members are encouraged to purchase their own sheet material stock. However, occasional sheets can be purchased from Bridge Rectifier at the cost + 10% to cover the postage costs associated with replenishing stock.

All stock usage, whether for induction or workshop, or personal use, must be logged.

A new wiki page should be created for each order and use recorder against it as material is used.