Difference between revisions of "Laser-cutting Inspiration"
From Bridge Rectifier Wiki
(→Configuring Software) |
(→Configuring Software) |
||
| Line 3: | Line 3: | ||
==== Configuring Software ==== | ==== Configuring Software ==== | ||
* File > Document Properties > Page | * File > Document Properties > Page | ||
| − | + | * Width 600 | |
| − | + | * Height 400 | |
| − | + | * Units mm | |
* File > Document Properties > Snap - NOT 'Always Snap' (eg 20/10/20) | * File > Document Properties > Snap - NOT 'Always Snap' (eg 20/10/20) | ||
* Edit > Preferences > Tools > (tick) Geometric bounding box | * Edit > Preferences > Tools > (tick) Geometric bounding box | ||
Revision as of 09:07, 16 April 2017
Contents
Inkscape File Editing
Configuring Software
- File > Document Properties > Page
- Width 600
- Height 400
- Units mm
- File > Document Properties > Snap - NOT 'Always Snap' (eg 20/10/20)
- Edit > Preferences > Tools > (tick) Geometric bounding box
- Edit > Preferences > Interface > Grids > eg x, y spacing 1, major grid every 10
- Edit > Preferences > Behaviour > Steps > 3.5433(07) px
Different Types of Cut
- Decide whether each part should be a drawn line (vector score), a filled area (raster engrave), or cut through.
- Set a stroke outline of a different colour for each, but no fill. The laser cutter software will be set later to apply a different treatment for each colour.
Text
- To allow lettering to be cut through material without parts falling out, download & install a stencil font, such as Awery.
- Text can be typed in, re-sized & moved.
- Once a piece of text is converted to a path (by Path > Object to Path), it’s no longer editable as text characters.
- Select a different stroke colour for a scored line vs filled ‘raster engrave’.
