Difference between revisions of "Laser-cutting Inspiration"
From Bridge Rectifier Wiki
(→Different Types of Cut) |
|||
| Line 4: | Line 4: | ||
==== Different Types of Cut ==== | ==== Different Types of Cut ==== | ||
| + | Decide whether each part should be a drawn line (vector score), a filled area (raster engrave), or cut through. Set a stroke outline of a different colour for each, but no fill. The laser cutter software will be set later to apply a different treatment for each colour. | ||
==== Text ==== | ==== Text ==== | ||
Revision as of 07:56, 16 April 2017
Contents
Inkscape File Editing
Configuring Software
Different Types of Cut
Decide whether each part should be a drawn line (vector score), a filled area (raster engrave), or cut through. Set a stroke outline of a different colour for each, but no fill. The laser cutter software will be set later to apply a different treatment for each colour.
